IISE PRACTICAL WORKSHOP • 2-DAY HYBRID TRAINING

EV Technology Workshop India – Learn Electric Vehicle Technology Through Practical Training

Build a strong foundation in electric vehicle technology through a focused two-day hybrid training programme covering EV batteries, BMS, motors, controllers, power electronics, charging systems and EV diagnostics.

⏱️ 2-Day Practical Workshop
🌐 Hybrid Learning (Online + Classroom)
📍 Mumbai / Navi Mumbai
🎓 Open to Beginners & Engineers
📜 Joint IISE + CERT Certificate
Regular: ₹19,999 Offer Fee: ₹14,999 Save ₹5,000 (25% Off)
Seat Booking Deposit Only ₹999
Instant confirmation • Limited seats per cohort • Verified joint certificate
EV Training Workshop India
Practical Hands-On Exposure Lithium-ion Battery Packs • BMS Architecture • BLDC/PMSM Motors • Inverter Controllers • EVSE Charging
Mumbai Classroom Session
PROGRAMME INTRODUCTION

Learn Electric Vehicle Technology from Fundamentals to Practical Applications

The global transition toward clean, electrified transportation is accelerating at an unprecedented pace. Electric vehicles represent far more than simply replacing an internal combustion engine with an electric motor—they embody a sophisticated mechatronic ecosystem integrating high-voltage electrochemical energy storage, advanced battery management algorithms, high-frequency power electronics, traction motor drives, and complex charging interfaces. This intensive two-day workshop is engineered to demystify these core subsystems and bridge the gap between academic theory and real-world industrial practice.

⚡

Electrified Powertrains

Understand how Battery Electric Vehicles (BEVs), Hybrid Electric Vehicles (HEVs), and Plug-in Hybrids (PHEVs) operate. Learn the interaction between traction battery packs, high-voltage contactors, and mechanical gear reducers.

🔋

Battery Packs & Smart BMS

Explore lithium-ion cell chemistries (NMC, LFP), series-parallel configurations, cell balancing mechanisms, State of Charge (SOC) estimation, State of Health (SOH), and thermal safety management.

⚙️

Motors & Power Electronics

Learn the principles of Brushless DC (BLDC) and Permanent Magnet Synchronous Motors (PMSM), PWM inverter control, MOSFET/IGBT switching stages, DC-DC buck/boost converters, and regenerative braking.

🔌

Charging Systems & Safety

Examine AC Level 1/2 chargers, DC Fast Charging stations, connector standards (Type 2, CCS-2, Bharat DC-001), onboard chargers (OBC), and rigorous electrical high-voltage safety protocols.

💡

Built for Beginners and Transitioning Technicians: You do not need prior electric vehicle experience. The curriculum starts from foundational principles and progresses systematically to hands-on practical demonstrations.

INDUSTRY DYNAMICS

Why Master Electric Vehicle Technology Now? -
EV Training Workshop India

India’s automotive sector is undergoing an irreversible transformation. Driven by national sustainability mandates, escalating fuel costs, and favorable policy frameworks like FAME and state EV subsidies, demand for electric mobility solutions is surging across two-wheelers, commercial fleets, and passenger cars. This dramatic shift has created an acute technical skill shortage in the Indian market.

01

Domestic Manufacturing Expansion

Indian OEMs and component startups are establishing localized manufacturing facilities for electric 2W/3W vehicles, motors, wiring harnesses, and battery packs, requiring thousands of qualified assembly and test personnel.

02

Battery Pack & BMS Engineering

The battery is the single highest-value component of an EV. Technical understanding of cell chemistries, spot welding, thermal dissipation, and BMS protection circuits unlocks high-demand technical roles.

03

Charging Infrastructure Rollout

Setting up public and private EV charging hubs requires technical expertise in AC single/three-phase systems, DC fast chargers, load distribution, and power grid safety compliance.

04

Shortage of EV Diagnostics Technicians

Traditional internal combustion engine mechanics often lack electrical and high-voltage training. Mechanics who master EV fault isolation, controller error codes, and insulation testing command significant value.

05

Fleet Electrification & Retrofitting

Commercial logistics, delivery fleets, and public transit are moving towards electric powertrains. Retrofit engineering and fleet maintenance management represent rapid-growth market segments.

06

Lucrative Entrepreneurial Ventures

Entrepreneurs can capitalize on electric mobility by establishing independent multi-brand EV service centers, lithium battery repair workshops, EV component distribution agencies, or charging stations.

TARGET AUDIENCE

Who Should Attend This EV Workshop?

The IISE EV Technology Workshop is carefully structured to provide deep technical value across multiple career stages and disciplines—from college graduates building initial domain fluency to seasoned workshop owners expanding into electric mobility.

✨ Open Eligibility Notice: No prior EV industry experience is mandatory. Beginners are welcome.
🎓

1. Engineering Students

Mechanical, Electrical, Electronics, and Automobile engineering students aiming to supplement their academic degree with verifiable, hands-on EV technical knowledge.

📐

2. Diploma & ITI Students

Polytechnic and vocational students seeking practical orientation on electric vehicle components, testing instruments, and workshop safety standards.

💼

3. Working Professionals

Engineers working in automotive, manufacturing, or power sectors who wish to upskill and transition their careers into electric mobility engineering.

🔧

4. Automobile Technicians

Practicing mechanics and automotive technicians aiming to safely work with high-voltage EV battery packs, wiring harnesses, and digital diagnostic scanners.

🔌

5. Electrical & Electronics Pros

Electrical contractors, electricians, and circuit designers looking to specialize in inverter power conversion, motor controllers, and EVSE charging stations.

☀️

6. Solar & Renewable Pros

Solar engineers and clean-tech professionals expanding into battery energy storage systems (BESS) and solar-powered electric vehicle charging infrastructure.

🚀

7. EV Entrepreneurs

Aspiring business owners evaluating commercial opportunities in EV dealerships, battery swapping, fleet conversions, charging networks, and spare parts distribution.

💡

8. Beginners & EV Enthusiasts

Any motivated learner with a passion for clean transportation who wants a structured, jargon-free introduction to how electric cars, bikes, and charging systems operate.

SPECIFICATIONS

Programme at a Glance

Key operational parameters of the IISE EV Technology Workshop. Clear, transparent, and structured for working professionals and students.

⏱️
Duration 2 Days Intensive
🌐
Learning Mode Hybrid (Online + Classroom)
📍
Training Location Mumbai / Navi Mumbai
📅
Batch Schedule Evergreen Batches
🎯
Eligibility Open to Everyone
📜
Certification Joint IISE + CERT
💰
Offer Tuition Fee ₹14,999 ₹19,999
🎟️
Seat Booking Amount ₹999 Only
CURRICULUM ARCHITECTURE

Detailed Technical Curriculum

A comprehensive 10-module technical curriculum organized specifically for an intensive two-day workshop. The structure carefully balances foundational engineering principles, hardware demonstrations, and supervised practical diagnostic exposure.

⚠️ Workshop Curriculum Scope: This syllabus is tailored as an accelerated, practical two-day technical workshop covering foundational principles, live component teardowns, and supervised diagnostic activities—it is distinct from multi-semester academic diplomas.

Module 1: Introduction to Electric Vehicles & Powertrain Architectures

Foundational Theory
  • Electric vehicle fundamentals and evolutionary history in India and globally.
  • Distinction between BEV (Battery EV), HEV (Hybrid EV), and PHEV (Plug-in Hybrid EV).
  • Systemic overview of EV vehicle architecture: traction loops, auxiliary loops, and mechanical interfaces.
  • Identification of primary subsystems: energy storage, traction drive, power conversion, thermal management, and vehicle control.
  • Commercial electric vehicle applications across 2W, 3W, passenger cars, and light commercial vehicles (LCV).

Module 2: EV Battery Technology & Pack Engineering

Core Engineering
  • Lithium-ion chemistry fundamentals: Lithium Iron Phosphate (LFP) vs Nickel Manganese Cobalt (NMC).
  • Cell form factors: Cylindrical (18650, 21700), Prismatic, and Pouch cell construction and characteristics.
  • Cell, module, and pack architecture: mechanical arrangement, nickel strip welding, busbars, and insulation.
  • Series (S) and Parallel (P) configurations for achieving target system voltage (V) and ampere-hour capacity (Ah).
  • Operating parameters: C-rates, Depth of Discharge (DoD), State of Charge (SOC), State of Health (SOH), and lifecycle degradation.

Module 3: Battery Management Systems (BMS)

Hardware & Protection
  • BMS hardware architecture: master-slave configurations, sensing ICs, and control logic.
  • Real-time individual cell voltage monitoring and multi-point NTC temperature sensing.
  • Cell balancing mechanisms: Passive resistive dissipative balancing vs Active capacitive/inductive charge shuttling.
  • Multi-layer protection thresholds: Over-voltage (OVP), Under-voltage (UVP), Over-current (OCP), and Short-circuit protection.
  • Thermal runaway mitigation protocols and BMS communication standards (UART, CAN Bus, Bluetooth).

Module 4: Electric Motors & Electromechanical Conversion

Traction Drives
  • Motor topologies in modern EVs: Brushless DC (BLDC), Permanent Magnet Synchronous Motors (PMSM), and AC Induction.
  • Stator winding arrangements, permanent neodymium magnet rotors, and back-Electromotive Force (back-EMF).
  • Operating principles: Hall effect sensor feedback, rotor position tracking, and field-oriented control fundamentals.
  • Torque-speed characteristics, continuous vs peak power ratings, and thermal cooling methods.
  • Criteria for traction motor selection across electric 2-wheelers, 3-wheelers, and passenger vehicle platforms.

Module 5: Motor Controllers & Power Electronics

Power Conversion
  • Function of the motor controller as the central nervous system bridging driver throttle input and traction output.
  • Three-phase DC-to-AC Inverter design: MOSFET and IGBT power semiconductor switches and gate drivers.
  • Pulse Width Modulation (PWM) and Sine Wave / Space Vector PWM control logic.
  • DC-DC step-down converters: stepping high traction voltage (48V–400V) down to 12V auxiliary vehicle power.
  • Motor-controller calibration, throttle curve configuration, and regenerative braking energy recuperation.

Module 6: EV Charging Technology & Infrastructure

Infrastructure
  • AC Charging vs DC Fast Charging principles and operational boundaries.
  • Onboard Chargers (OBC): single-phase 3.3 kW vs three-phase 11 kW/22 kW power conversion.
  • Connector standards: Type 2 (Mennekes), Combined Charging System (CCS-2), CHAdeMO, and Bharat DC-001/AC-001.
  • Electric Vehicle Supply Equipment (EVSE) communication: Control Pilot (CP) and Proximity Pilot (PP) signaling.
  • Charging station infrastructure planning: power load calculations, earthing standards, and safety isolation.

Module 7: EV Diagnostics, Troubleshooting & Preventive Maintenance

Field Service
  • Diagnostic methodology: systematic fault isolation across electrical, communications, and mechanical loops.
  • Common EV failure modes: cell imbalance, BMS lockout, MOSFET breakdown, Hall sensor failure, and throttle sensor drift.
  • Digital diagnostic equipment: high-voltage multimeters, clamp meters, insulation resistance testers (Megger), and CAN scanners.
  • Interpreting Diagnostic Trouble Codes (DTCs) and controller flashing codes.
  • Preventive maintenance schedules: coolant inspection, contactor wear, wiring harness abrasion, and connector torque checks.

Module 8: EV High-Voltage Electrical Safety & Standards

Workshop Safety
  • Electrical hazards in electric vehicles: DC arc flash, electrocution risks, and high-voltage classification (>60V DC).
  • Orange high-voltage cabling identification, shielding, and High-Voltage Interlock Loops (HVIL).
  • Manual Service Disconnect (MSD) operation: zero-voltage verification and Lockout/Tagout (LOTO) protocols.
  • Personal Protective Equipment (PPE): 1000V Class 0 insulated gloves, arc-rated face shields, and insulated hand tools.
  • Emergency response awareness: handling thermal runaway, battery fires, Class D fire extinguishers, and post-collision vehicle isolation.

Module 9: Practical Demonstrations & Component Teardowns

Supervised Demos
  • Physical inspection and teardown demonstration of real EV sub-assemblies.
  • Lithium-ion battery pack inspection: examining cell layout, busbar connections, and balance lead routing.
  • BMS wiring and connection demonstration: wiring voltage sense harnesses and testing balance leads.
  • Traction motor and controller bench demonstration: inspecting stator laminations, Hall sensors, and inverter terminals.
  • Charging connector demonstration: testing pilot signaling and inspection of Type-2 and CCS charging assemblies.

Module 10: EV Industry Applications & Commercial Opportunities

Business & Career
  • Setting up an independent multi-brand electric vehicle service workshop: equipment, tooling, and floor layout.
  • Commercial viability in lithium battery pack assembly, diagnostic repair, and second-life solar storage repurposing.
  • EV charging infrastructure business models: CAPEX vs OPEX models, grid connection requirements, and revenue streams.
  • EV component distribution, aftermarket spare parts sourcing, and dealership technical support.
  • Career development roadmap: moving from workshop orientation to specialized diploma qualifications.
TRAINING SCHEDULE

Two-Day Training Roadmap

A structured, day-by-day progression designed to maximize learning efficiency. Day 1 builds foundational mastery of core electrical and electrochemical systems, while Day 2 focuses on charging infrastructure, high-voltage safety, and supervised practical demonstrations.

Day 1 Roadmap

EV Fundamentals & Core Powertrain Technologies

Part 1: EV Introduction & Vehicle Architecture BEV, HEV, and PHEV comparison; powertrain layout; subsystem mapping and energy flow dynamics.
Part 2: Lithium-ion Batteries & Cell Chemistry NMC vs LFP; cylindrical 18650/21700 cells; series-parallel capacity calculations; C-rates and DoD.
Part 3: Battery Management Systems (BMS) BMS architecture; cell voltage and temperature monitoring; active vs passive balancing; short-circuit protection.
Part 4: Motors, Controllers & Power Electronics BLDC vs PMSM construction; inverter MOSFET/IGBT switching; DC-DC converters; regenerative braking.
Day 2 Roadmap

Charging, Diagnostics, Safety & Practical Demos

Part 5: EV Charging Standards & Station Setup AC single/three-phase vs DC Fast Charging; Type 2, CCS-2, and Bharat DC-001; EVSE pilot communication.
Part 6: High-Voltage Electrical Safety & PPE Manual Service Disconnect (MSD); High-Voltage Interlock Loop (HVIL); 1000V PPE; thermal safety response.
Part 7: Supervised Practical Hardware Demonstrations Component teardowns; BMS wiring and balancing demonstration; diagnostic multimeter and CAN tool walkthrough.
Part 8: Troubleshooting & Business Opportunities Systematic fault isolation protocols; launching EV service or battery ventures; joint certificate orientation.
PRACTICAL LAB EXPOSURE

Hands-On Learning & Component Exposure

Theoretical understanding comes alive through physical hardware inspection. The workshop incorporates dedicated practical demonstration sessions where participants observe real EV components, explore their internal engineering, and understand safe diagnostic procedures.

🔬 Practical Protocol: Clear distinction is maintained between instructor-led component teardown demonstrations, guided instrument testing, and supervised workshop safety procedures.
🔋

1. EV Battery Packs

Physical inspection of 18650 and 21700 cylindrical cell arrays, nickel strip spot-weld patterns, cell holders, busbar interconnects, and fire-retardant thermal barriers.

📟

2. Smart BMS Boards

Demonstration of hardware BMS circuit boards, multi-pin voltage sense wire harnesses, balance lead wiring, shunt resistors, and solid-state disconnect MOSFETs.

⚙️

3. Traction Motors

Cut-section examination of BLDC hub motors and mid-drive PMSM motors: inspecting stator windings, rotor neodymium magnets, bearings, and Hall-effect sensors.

🎛️

4. Motor Controllers

Teardown inspection of three-phase sine wave motor controllers: analyzing aluminum heatsinks, power bus capacitors, gate driver circuitry, and wiring harness terminals.

🔄

5. Power Electronics & DC-DC

Examination of DC-DC buck converters that step down 48V/72V traction voltages to 12V auxiliary power for headlights, indicators, horns, and instrument clusters.

🔌

6. Charging Hardware & Guns

Inspection of physical charging connectors: Type 2 AC charging inlet and gun, CCS-2 DC pins, pilot communication pins, and charging station safety contactors.

📊

7. Diagnostic Multimeters & Scanners

Hands-on orientation with high-voltage CAT III/IV digital multimeters, DC clamp meters, insulation testers (Megger), and OBD-II / CAN diagnostic interfaces.

🛡️

8. Safety Disconnects & PPE

Handling 1000V Class 0 insulated safety gloves, face protection, insulated hand tools, and executing safe Manual Service Disconnect (MSD) isolation procedures.

LEARNING OUTCOMES

What Will You Learn?

Upon completing the IISE EV Technology Workshop, participants gain a solid, foundational technical understanding across ten critical electric vehicle engineering domains.

1

EV Powertrain Architecture

Identify high-voltage circuits, auxiliary circuits, and mechanical gear coupling across BEV, HEV, and PHEV platforms.

2

Battery Pack Sizing & Design

Calculate battery pack capacity, series-parallel configurations, energy density (Wh/kg), and C-rates for specific vehicle targets.

3

BMS Protection & Cell Balancing

Comprehend cell voltage monitoring, passive vs active balancing circuitry, and thermal cutoff protection mechanisms.

4

Traction Motor Selection

Compare BLDC, PMSM, and induction motors based on torque-speed curves, back-EMF, efficiency maps, and thermal ratings.

5

Inverter & Controller Operation

Understand how PWM modulates three-phase power inverters, controls motor speed, and implements regenerative braking.

6

Charging Standards & Connectors

Distinguish AC single/three-phase and DC fast-charging connector protocols (Type 2, CCS-2, Bharat DC-001) and pilot signaling.

7

Diagnostic & Fault Isolation

Master structured fault isolation workflows for cell imbalance, controller lockouts, Hall sensor faults, and insulation failure.

8

High-Voltage Electrical Safety

Execute safe Manual Service Disconnect (MSD) isolation, zero-voltage verification, and wear appropriate 1000V rated PPE.

9

Real-World Component Inspection

Recognize genuine automotive-grade EV components, terminal designations, wiring gauge sizes, and physical connector pinouts.

10

E-Mobility Commercial Vision

Evaluate practical business models in independent EV maintenance, battery servicing, charging station setups, and component retail.

Note: The workshop provides strong conceptual and technical grounding; continued practical experience and advanced diploma training are recommended for full professional qualification.
OPPORTUNITIES

Career & Business Pathways in Electric Mobility

The foundational technical skills acquired during this workshop serve as a launchpad for specialized employment roles, workshop upgrades, and entrepreneurial ventures within India’s electric mobility ecosystem.

📌 Professional Scope Notice: This workshop is an orientation and skill-development foundation. It does not provide an automatic job guarantee, government electrical licence, or engineering degree.

EV Service & Maintenance Technician

Work with authorized EV dealerships, fleet operators, or independent automotive workshops conducting routine maintenance, electrical checks, and controller fault clearing.

Battery Pack Assembly & Testing Associate

Assist in lithium-ion battery manufacturing facilities, pack assembly units, or cell testing laboratories, focusing on spot welding, BMS wiring, and quality control.

EV Charging Infrastructure Field Support

Provide on-site technical support for public and commercial EV charging operators, inspecting AC/DC chargers, resolving connector faults, and verifying earthing.

EV Component Sales & Technical Advisor

Bridge technical and commercial domains by representing EV motor, controller, battery, or charger distributors to automotive aftermarket businesses.

Independent EV Service Entrepreneur

Upgrade an existing internal combustion workshop or establish a new multi-brand electric 2W/3W service center, battery health testing clinic, or charging point.

Foundation for Advanced EV Diplomas

Utilize this two-day workshop as a strong technical prerequisite before enrolling in IISE's comprehensive 6-month or 12-month Advanced Diploma programmes.

INSTITUTIONAL CREDIBILITY

Why Train with the Indian Institute of Solar Energy?

Established in 2018, IISE (a Unit of CERMS India Foundation) is dedicated to delivering industry-oriented technical training across renewable energy, energy storage, and electric mobility technologies. We focus on practical competence, safety engineering, and applied industry literacy.

🏛️

Established Technical Heritage (Est. 2018)

As a Unit of CERMS India Foundation, IISE has specialized in clean-tech education since 2018, providing rigorous vocational and technical upskilling without corporate hyperbole.

⚡

Clean Energy & EV Specialization

Unlike generic IT or multi-discipline training centers, IISE is dedicated specifically to solar PV systems, battery energy storage, and electric vehicle powertrain engineering.

🛠️

Applied Technical Orientation

Our curriculum prioritizes component-level understanding, real hardware teardowns, circuit inspection, and safe multimeter diagnostic workflows over pure textbook theory.

🔄

Flexible Hybrid Delivery

Our hybrid methodology allows working professionals and students to review preparatory conceptual materials online before attending intensive practical classroom sessions in Mumbai.

📜

Joint IISE + CERT Credential

Participants completing workshop requirements receive a joint certificate from the Indian Institute of Solar Energy and the Centre for Energy Research and Training (CERT).

👥

Dedicated Academic Guidance

Our counseling and admissions staff provides direct support via WhatsApp and phone to guide students through batch schedules, venue logistics, and ongoing learning pathways.

OFFICIAL CREDENTIAL

Earn a Joint Certificate from IISE + CERT

Participants who attend the two-day hybrid training programme and satisfy applicable completion criteria receive an official Joint Certificate of Completion issued by the Indian Institute of Solar Energy (IISE) and the Centre for Energy Research and Training (CERT).

Verified Professional Credential

Joint Certificate in Electric Vehicle Technology Workshop

Issued by Indian Institute of Solar Energy (IISE) • Centre for Energy Research and Training (CERT)
✔️ Technical Recognition Validates completion of 10 comprehensive EV modules and practical demonstrations.
✔️ Shareable Digital Asset Showcase on LinkedIn, professional resumes, and technical project portfolios.
✔️ Unique Verification Code Includes individual credential numbering and authorized institutional seals.

Transparency Disclaimer: This certificate recognizes active participation and workshop completion. It does not constitute a university degree, statutory engineering licence, or government regulatory certification.

DELIVERY MODEL

Training Location & Hybrid Delivery Model

The IISE EV Technology Workshop utilizes a flexible hybrid model that allows participants to absorb foundational theory comfortably before engaging in live component teardowns and diagnostic demonstrations in the classroom.

💻

Phase 1: Online Preparatory Modules

Prior to classroom practicals, registered participants receive access to foundational study notes and technical introductory overviews covering basic electrical concepts, battery chemistry, and powertrain nomenclature.

Self-Paced Flexible Study
🏢

Phase 2: Classroom Practical Training

Intensive in-person sessions conducted at our training facility in Mumbai / Navi Mumbai. Features instructor-led component teardowns, BMS wiring demonstrations, motor bench tests, and supervised multimeter procedures.

Mumbai / Navi Mumbai Venue
📅

Phase 3: Evergreen Batches & Venue Details

Batches are conducted on an evergreen schedule throughout the year. The exact classroom center address, landmark directions, and batch timetable are communicated directly by admissions during student onboarding.

Confirmed Upon Enrolment
TRANSPARENT PRICING

Programme Fees & Investment

Quality technical training priced transparently. Take advantage of the limited-period special offer fee and reserve your confirmed seat with a nominal booking amount.

Special Cohort Discount • Direct Savings
Regular Fee: ₹19,999 Special Offer: ₹14,999 You Save ₹5,000 (25% Off)
Reserve Your Seat Today With Just ₹999 Booking Amount Balance fee payable prior to classroom batch commencement
What Is Included:
  • Complete 2-day hybrid workshop (online prep + Mumbai classroom practicals).
  • Comprehensive digital study notes and technical reference materials.
  • Component-level demonstrations (Battery packs, BMS, Motors, Inverters, EVSE).
  • Official Joint Certificate of Completion issued by IISE + CERT.
  • Direct admissions counseling and batch scheduling coordination.
ENROLMENT STEPS

Simple 4-Step Admission Process

Enrolling in the IISE EV Technology Workshop is fast, straightforward, and secure. Follow these four simple steps to reserve your confirmed seat.

1

Submit Online Enquiry

Fill out the official IISE course enquiry form with your contact details, education or professional background, and preferred training timing.

2

Admissions Discussion

Our admissions counselor contacts you via phone or WhatsApp to address your queries, discuss upcoming cohort dates, and finalize batch allocation.

3

Reserve Seat for ₹999

Complete the nominal ₹999 seat booking amount through the verified payment process to lock in your special offer fee of ₹14,999.

4

Batch Onboarding

Receive your formal registration confirmation, preparatory study access, and detailed classroom venue address and schedule instructions.

ASSISTANCE & SUPPORT

Student Support & Admission Enquiries

Have questions about upcoming batch dates, hybrid learning logistics, or workshop content? Our dedicated admissions and technical advisory team is available to help you make an informed decision.

💬

WhatsApp Direct Guidance

Chat directly with an admissions advisor for immediate syllabus details and batch booking.

Chat: +91 8850902306
📞

Telephonic Consultation

Speak with our training coordinators Monday through Saturday from 10:00 AM to 6:00 PM IST.

Call: +91 8850902306 / +91 9819225503
✉️

Email Enquiries

Send your academic queries or corporate training requirements to our official email desk.

info@indianinstituteofsolarenergy.com
FREQUENTLY ASKED QUESTIONS

Frequently Asked Questions

Clear, verified answers to common technical, scheduling, and admission queries regarding the IISE EV Technology Workshop.

The EV Technology Workshop is a focused, two-day hybrid training programme developed by the Indian Institute of Solar Energy (IISE). It delivers a structured, practical orientation to electric vehicle subsystems, covering lithium-ion battery packs, Battery Management Systems (BMS), electric traction motors (BLDC/PMSM), motor controllers, power inverters, AC and DC charging systems, diagnostic troubleshooting, and high-voltage workshop safety.

The workshop spans 2 intensive days. It follows an optimized hybrid training format comprising self-paced online preparatory materials followed by concentrated in-person classroom lectures and practical hardware teardown demonstrations in Mumbai / Navi Mumbai.

Yes, absolutely. The programme is purposefully designed from first principles. Our instructors begin with foundational concepts of electricity, automotive architecture, and battery chemistry before advancing to component integration, diagnostic multimeters, and troubleshooting logic. No prior EV industry experience is required.

Eligibility is open to everyone. Engineering students (Mechanical, Electrical, Automobile, Electronics), polytechnic and ITI diploma students, practicing automotive mechanics, electrical technicians, solar professionals, entrepreneurs, and tech enthusiasts interested in electric mobility are all welcome.

The workshop utilizes a hybrid delivery model. Preparatory foundational modules and study notes are provided digitally, while core technical lectures, component teardowns, physical BMS wiring, and instrument demonstrations take place in our classroom training facility in Mumbai / Navi Mumbai.

Practical classroom sessions and demonstrations are held at IISE’s training facility in Mumbai / Navi Mumbai. The exact venue location, transit directions, and batch timetable are shared directly with enrolled participants during admission onboarding.

The regular tuition fee is ₹19,999. Under the current limited-period special offer, the fee is ₹14,999, providing a direct saving of ₹5,000 (25% discount). This fee includes complete 2-day hybrid instruction, digital study notes, practical demonstrations, and the joint IISE + CERT certificate.

You can confirm and reserve your seat with a nominal booking deposit of ₹999. The remaining balance fee is payable prior to classroom batch commencement.

The workshop covers electric vehicle powertrain architectures (BEV, HEV, PHEV), lithium-ion cell chemistries (NMC, LFP), Battery Management Systems (BMS), electric motors (BLDC, PMSM), motor controllers, MOSFET/IGBT inverters, DC-DC converters, AC and DC fast charging infrastructure, digital diagnostic scanners, and 1000V high-voltage safety standards.

Yes. Module 2 is dedicated to battery technology, covering cylindrical (18650, 21700), prismatic, and pouch cells; series-parallel capacity sizing calculations; C-ratings; Depth of Discharge (DoD); thermal management; and safety considerations.

Yes. Module 3 focuses on Battery Management Systems (BMS), including hardware architecture, voltage and temperature sensing, passive vs active cell balancing, over-voltage/under-voltage protection, short-circuit cutoffs, and CAN bus communication.

Yes. Modules 4 and 5 cover Brushless DC (BLDC) motors, Permanent Magnet Synchronous Motors (PMSM), stator-rotor construction, torque-speed curves, regenerative braking, inverter switching electronics, and motor controller tuning.

Yes. Module 6 covers EV charging infrastructure, comparing AC single-phase and three-phase charging with DC Fast Charging. It examines Type-2, CCS-2, and Bharat DC-001 connectors, EVSE control pilot communication, and public charging station setup requirements.

Yes. The workshop includes instructor-led physical component inspections, battery pack teardown demonstrations, BMS wiring and balancing demos, motor-controller bench examinations, and safe diagnostic instrument workflows.

Participants completing workshop requirements receive an official Joint Certificate of Completion issued by the Indian Institute of Solar Energy (IISE) and the Centre for Energy Research and Training (CERT).

No. This is an intensive two-day technical workshop designed for foundational competence and orientation. For in-depth, multi-month professional engineering and design qualifications, IISE offers separate Advanced Diploma and PG Diploma programmes in Electric Vehicle Technology.

This workshop is a short-term skill development and technical orientation programme. It provides actionable industry literacy and a verifiable certificate, but it does not provide an automatic job guarantee or placement promise.

You can apply online by submitting the course enquiry form on our website or by chatting directly with our admissions desk on WhatsApp at +91 8850902306. You can then reserve your seat by paying the ₹999 booking amount.

ENROL TODAY

Start Your Journey into Electric Vehicle Technology

Build your understanding of electric vehicles, battery systems, motors, BMS and charging infrastructure through IISE’s two-day hybrid EV Technology Workshop.

⏱️ 2 Days 🌐 Hybrid Learning 📍 Mumbai / Navi Mumbai 💰 ₹14,999 Offer Fee 🎟️ ₹999 Booking Amount 📜 Joint IISE + CERT Certificate
Indian Institute of Solar Energy • Unit of CERMS India Foundation • Established in 2018