Admissions Open – Enrol Anytime

Fundamentals of Battery Storage Course in India

Learn Battery Technology, Lithium-Ion Systems, Battery Management Systems and Energy Storage Applications.

Build a foundational understanding of modern battery storage technology through a structured, one-month, self-paced online programme offered by the Indian Institute of Solar Energy (IISE), with technical support from CERT.

Duration
1 Month
Programme Fee
₹9,999
Eligibility
10th Pass & Above
Delivery Mode
100% Online
Schedule
Self-Paced
Certification
IISE + CERT
Battery Energy Storage Architecture Technical Schematic
INDUSTRIAL BESS ENCLOSURE (40ft ISO) HV DC BUS: 1000V - 1500V | LFP CHEMISTRY RACK 01 16S Modules RACK 02 16S Modules MASTER BMS SOC: 94.2% SOH: 99.1% TEMP: 26.5°C BALANCING: ON CAN/MODBUS PCS INVERTER Bidirectional 415V 3-Phase EFF: 98.4% Grid Synced
Foundational engineering course covering cell electrochemistry, battery pack wiring, BMS protection, and BESS integration.
Overview

About the Fundamentals of Battery Storage Programme

A foundational engineering course bridging electrochemistry and electrical power systems for India's clean energy transition.

Electrical energy storage is the cornerstone of modern, reliable, and decarbonized power infrastructure. As solar photovoltaics (PV) and wind power expand across India, the fundamental challenge has shifted from clean energy generation to dispatchability, flexibility, and grid stability. Battery storage technology bridges the natural gap between intermittent solar generation during daytime hours and peak electrical demand during evening cycles.

The Fundamentals of Battery Storage programme is a specialised one-month, 100% online, self-paced course designed by the Indian Institute of Solar Energy (IISE) with technical support from the Centre for Energy Research and Training (CERT). It provides an engineering-grounded, accessible entry point into the principles governing modern battery technologies, Lithium-ion architectures (such as Lithium Iron Phosphate and Nickel Manganese Cobalt), Battery Management Systems (BMS), and Battery Energy Storage Systems (BESS).

From behind-the-meter residential energy independence and commercial peak demand reduction to multi-megawatt utility-scale BESS installations, learners explore the complete technology spectrum. The course systematically demystifies electrochemical reactions, cell and module packaging, voltage and ampere-hour ratings, state-of-charge calculations, thermal safety mechanisms, and hybrid inverter integrations.

Whether you are an aspiring clean-tech technician, an engineering student, an active solar installer expanding into energy storage, or an industry professional seeking technical literacy in batteries, this course equips you with actionable knowledge without requiring prior advanced degrees.

Industry Relevance

Why Battery Storage Skills Matter in the Renewable Energy Industry

Explore the six foundational pillars driving global and national demand for technical battery storage literacy.

⚡

1. Renewable Energy Integration

Solar and wind generation are inherently variable. Battery energy storage provides critical firming and smoothing capacity, capturing excess green energy during peak generation hours and dispatching it when grids face steep evening demand ramp rates. Understanding storage mechanisms is essential for modern grid integration.

☀️

2. Solar Energy Storage

Solar-plus-storage represents the fastest-growing segment in distributed power generation. Moving beyond simple grid-tied solar, hybrid systems allow residential and commercial consumers to achieve high self-consumption, store surplus rooftop power, and ensure uninterrupted backup during utility outages.

🚗

3. Electric Mobility

India's rapid transition toward electric 2-wheelers, 3-wheelers, commercial fleets, and buses relies fundamentally on lithium-ion pack engineering. Understanding cell configurations, thermal behavior, C-rates, and BMS safety logic provides core competence across stationary and mobile battery sectors.

🏢

4. Commercial & Industrial Storage

Commercial facilities and manufacturing plants face rising maximum demand charges and time-of-day tariffs. Battery systems enable peak shaving, diesel generator displacement, power quality correction, and emergency power backup, creating compelling operational cost savings and emission reductions.

🌐

5. Grid Stability & Energy Management

Modern transmission networks require millisecond-fast frequency response, voltage control, and synthetic inertia. Utility-scale BESS provides automated frequency regulation, spinning reserve substitution, and transmission deferral, supporting national grid resilience and decarbonization targets.

🔬

6. Battery Technology Innovation

From the dominant Lithium Iron Phosphate (LFP) chemistry to emerging sodium-ion batteries, solid-state cells, and flow batteries, chemical architectures are evolving rapidly. Technical professionals who comprehend cell electrochemistry and pack design will lead next-generation energy storage deployment.

Learning Outcomes

What Will You Learn in This Battery Storage Course?

Action-oriented learning objectives designed to give you conceptual mastery and practical technical calculation capabilities.

✓

Fundamentals of Electrical Energy Storage

Understand core thermodynamic and electrochemical laws governing energy storage conversion, power ratings, and round-trip efficiency.

✓

Battery Chemistry & Electrochemical Principles

Examine redox reactions, anode and cathode material compositions, electrolyte ion transport, and cell voltage determinants.

✓

Cell, Module & Pack Architecture

Master cylindrical, prismatic, and pouch cell form factors, along with series-parallel stringing for voltage and capacity aggregation.

✓

Lithium-Ion Technologies (LFP, NMC, NCA)

Compare specific energy, cycle life, thermal runaway resistance, and cost parameters across leading commercial lithium chemistries.

✓

Battery Management Systems (BMS)

Understand multi-channel voltage, current, and temperature telemetry, state estimation (SOC, SOH, SOP), and active/passive cell balancing.

✓

Battery Sizing & Capacity Calculations

Perform real-world load analysis, Depth of Discharge (DoD) derating, C-rate evaluation, and required backup energy calculations.

✓

Charging & Discharging Dynamics

Analyze Constant Current / Constant Voltage (CC/CV) charging curves, internal resistance heating, and voltage sag under high discharge.

✓

Energy Storage System Architecture

Explore containerized BESS, bidirectional Power Conversion Systems (PCS), Energy Management Systems (EMS), and auxiliary HVAC systems.

✓

Solar PV & Battery Integration

Evaluate AC-coupled vs. DC-coupled topologies, hybrid solar inverters, microgrid architectures, and critical load prioritization.

✓

Battery Safety & Thermal Management

Identify causes of thermal runaway, fire suppression standards, safe storage protocols, and protective circuit thresholds.

✓

Basic BESS Application Engineering

Understand commercial peak shaving, time-of-use energy arbitrage, EV fast charging support, and microgrid frequency control.

✓

Performance & Lifecycle Management

Examine capacity fade mechanisms, cycle life vs. calendar life, second-life battery repurposing, and closed-loop recycling principles.

Curriculum

Comprehensive Course Curriculum – 10 Modules

A rigorous, 10-module self-paced syllabus structured to take you from foundational physics to advanced system applications.

  • • Introduction to electrical energy storage
  • • Role of batteries in modern energy systems
  • • Types of energy storage technologies
  • • Mechanical, electrochemical, thermal and electrical storage overview
  • • Battery terminology and fundamental parameters
  • • Energy (Wh/kWh) and power (W/kW)
  • • Overview of stationary and mobile battery applications
  • • Introduction to Battery Energy Storage Systems (BESS)
Learning Outcome: Understand the fundamentals of energy storage and the role of batteries in modern electrical systems.

  • • Fundamentals of electrochemistry
  • • Anode, cathode and electrolyte functions
  • • Cell voltage and capacity determinants
  • • Charge and discharge mechanisms
  • • Primary and secondary batteries
  • • Lead-acid battery fundamentals
  • • Lithium-ion battery fundamentals
  • • Nickel-based battery technologies
  • • Introduction to sodium-ion batteries
  • • Comparative overview of battery chemistries
Learning Outcome: Understand the operating principles and fundamental differences between major battery technologies.

  • • Lithium-ion battery fundamentals
  • • LFP (Lithium Iron Phosphate) chemistry
  • • NMC (Nickel Manganese Cobalt) chemistry
  • • NCA and other relevant chemistries
  • • Cylindrical, prismatic and pouch cells
  • • Cell, module and pack architecture
  • • Series and parallel configurations
  • • Battery voltage and capacity aggregation
  • • Energy density and power density trade-offs
  • • Battery degradation fundamentals
Learning Outcome: Identify lithium-ion battery architectures and understand their technical characteristics and applications.

  • • Introduction to BMS functions
  • • BMS architecture and hardware components
  • • Cell voltage monitoring
  • • Temperature monitoring
  • • Current monitoring
  • • State of Charge (SOC) estimation
  • • State of Health (SOH) estimation
  • • State of Power (SOP) estimation
  • • Cell balancing (active vs passive)
  • • Overvoltage and undervoltage protection
  • • Overcurrent and short-circuit protection
  • • Communication protocols: CAN and RS485 fundamentals
Learning Outcome: Understand the function of BMS in battery monitoring, protection and performance management.

  • • Understanding electrical loads
  • • Energy consumption calculations
  • • Battery capacity calculations (kWh, Ah)
  • • Voltage and ampere-hour relationships
  • • Depth of Discharge (DoD) implications
  • • Usable battery capacity derating
  • • Round-trip efficiency factors
  • • Charge and discharge rates
  • • C-rate fundamentals and thermal impact
  • • Backup-time calculations
  • • Battery sizing considerations
  • • Battery selection for different applications
Learning Outcome: Understand the basic calculations and considerations involved in selecting and sizing battery storage systems.

  • • Introduction to stationary BESS
  • • BESS system components
  • • Battery racks and cabinets
  • • Power Conversion Systems (PCS)
  • • Bidirectional inverters
  • • Battery management architecture
  • • Energy Management Systems (EMS)
  • • Thermal management systems (HVAC / liquid cooling)
  • • AC-coupled and DC-coupled systems
  • • Containerised BESS configurations
  • • Grid-connected and standalone systems
  • • Basic BESS system architecture
Learning Outcome: Understand the architecture and major components of stationary battery energy storage systems.

  • • Fundamentals of solar PV systems
  • • Solar PV and battery integration principles
  • • Hybrid inverter fundamentals
  • • Off-grid solar battery systems
  • • Grid-connected solar-plus-storage
  • • AC-coupled topologies
  • • DC-coupled topologies
  • • Battery charging from solar generation
  • • Energy management and load prioritisation
  • • Backup power applications
  • • Introduction to solar-plus-storage system sizing
Learning Outcome: Understand how battery storage is integrated with solar PV systems for different applications.

  • • Battery safety fundamentals
  • • Electrical and operational hazards
  • • Thermal runaway causes and propagation
  • • Thermal management techniques
  • • Battery protection systems and fusing
  • • Fire safety and aerosol suppression considerations
  • • Battery testing fundamentals
  • • Capacity testing procedures
  • • Performance evaluation and degradation metrics
  • • Battery health monitoring
  • • Safe handling, transport and storage
  • • Battery recycling and end-of-life considerations
Learning Outcome: Understand major battery safety risks, monitoring practices and fundamental testing procedures.

  • • Battery system installation principles
  • • Site and environmental considerations
  • • Electrical connection fundamentals and torque specs
  • • Battery commissioning overview
  • • Charging and discharging operation protocols
  • • Battery monitoring procedures
  • • Preventive maintenance schedules
  • • Fault identification and warning codes
  • • Common battery failure modes
  • • Troubleshooting fundamentals
  • • Operational safety standards
  • • Battery lifecycle management
Learning Outcome: Understand the principles of battery installation, operation and maintenance without representing this online programme as supervised practical training.

  • • Residential energy storage markets
  • • Commercial and industrial BESS deployments
  • • Utility-scale energy storage projects
  • • Microgrids for remote and industrial applications
  • • Electric vehicle battery applications
  • • Renewable energy integration policies
  • • Grid support and ancillary service applications
  • • Battery energy management trends
  • • Emerging battery technologies (Sodium-ion, Solid-state)
  • • Recycling and circular economy frameworks
  • • Industry opportunities and business applications
  • • Introduction to battery storage project development
Learning Outcome: Understand the major industry applications of battery storage and potential professional development pathways.

Technology Comparison

Explore Different Battery Technologies

A rigorous engineering comparison of dominant and emerging commercial energy storage chemistries.

Lithium Iron Phosphate (LFP)

LiFePO4

Operating Principle: Intercalation of lithium ions between a graphite anode and a lithium iron phosphate cathode via a non-aqueous liquid electrolyte.

Nominal Voltage:3.2 V
Cycle Life:3,000 – 6,000+
Thermal Stability:High (~270°C)
Energy Density:130 – 170 Wh/kg

Advantages: Superior thermal safety, cobalt-free chemistry, exceptional cycle longevity, flat discharge voltage curve.

Limitations: Lower gravimetric energy density than NMC, challenging SOC estimation due to flat voltage curve.

Applications: Stationary BESS, Solar Rooftop, Commercial Storage, Electric Buses.

Nickel Manganese Cobalt (NMC)

LiNiMnCoO2

Operating Principle: Lithium-ion intercalation utilizing a mixed transition-metal oxide cathode combining high energy (nickel) with stability (manganese).

Nominal Voltage:3.6 – 3.7 V
Cycle Life:1,500 – 2,500
Thermal Stability:Moderate (~210°C)
Energy Density:200 – 260 Wh/kg

Advantages: Very high energy density, strong power delivery, compact footprint for space-constrained installations.

Limitations: Lower thermal runaway threshold, higher raw material costs, contains cobalt and nickel.

Applications: Electric Passenger Vehicles, Portable Power Stations, Premium Compact Storage.

Lead-Acid (Flooded & VRLA)

Pb / PbO2

Operating Principle: Chemical conversion between lead dioxide (positive plate), sponge lead (negative plate), and sulfuric acid electrolyte.

Nominal Voltage:2.0 V
Cycle Life:500 – 1,200
Depth of Discharge:50% Rec.
Energy Density:30 – 45 Wh/kg

Advantages: Low upfront capital expenditure, mature manufacturing supply chain, 99%+ closed-loop recyclability.

Limitations: Heavy weight, low energy density, limited cycle life, sulfation under partial state of charge.

Applications: Legacy Solar Inverters, Telecommunication Towers, UPS Backup, SLI Starting.

Nickel-Based Batteries

NiCd / NiMH

Operating Principle: Electrochemical reaction between nickel hydroxide positive electrode and cadmium or hydrogen-absorbing metal alloy negative electrode.

Nominal Voltage:1.2 V
Cycle Life:1,000 – 2,000
Operating Range:-20°C to +50°C
Energy Density:50 – 80 Wh/kg

Advantages: Exceptional resilience to extreme ambient temperatures, robust mechanical durability, tolerant of deep discharge.

Limitations: Memory effect in NiCd, high self-discharge rate, toxic cadmium disposal constraints.

Applications: Industrial Switchgear, Substation DC Emergency Power, Aviation, Railway Signalling.

Sodium-Ion Batteries (SIB)

Na-Ion

Operating Principle: Rocking-chair sodium-ion shuttle between hard carbon anode and sodium transition metal oxide / Prussian blue cathode.

Nominal Voltage:3.0 – 3.1 V
Cycle Life:2,000 – 4,000
Cold Behavior:Excellent (-20°C)
Energy Density:120 – 160 Wh/kg

Advantages: Abundant low-cost sodium raw materials, aluminum current collectors on both terminals, zero-volt safe transport.

Limitations: Nascent commercial manufacturing scale, slightly lower energy density than mature LFP.

Applications: Grid-Scale Stationary BESS, Micro-EVs, Telecommunication Power, Cold Climates.

Emerging Technologies

Solid-State / VRFB

Operating Principle: Solid electrolyte ion conduction (Solid-State) or liquid phase vanadium redox electrolytes in external tanks (Flow Batteries).

VRFB Cycle Life:15,000 – 20,000+
Solid Density:350 – 500 Wh/kg
Storage Duration:Long (6 – 12+ hrs)
Thermal Safety:Ultra-High

Advantages: Zero fire risk (VRFB aqueous electrolyte), independent power and energy scaling, non-degrading active chemistry.

Limitations: High initial capital cost, large physical footprint (VRFB), complex solid-solid interface manufacturing.

Applications: Multi-Hour Utility Energy Shifting, Substation Reserves, Critical Defense Infrastructure.
Electronic Control

Master the Fundamentals of Battery Management Systems

The digital brain behind every safe, high-performing lithium-ion pack and grid-scale BESS installation.

Why a Dedicated BMS is Mission-Critical

Unlike lead-acid batteries, lithium-ion chemistries cannot self-regulate cell balance or tolerate overcharging without catastrophic thermal risks. The Battery Management System (BMS) acts as a real-time electronic safeguard and intelligent controller.

  • • Real-Time Monitoring: Continuously measures millivolt-level cell voltages, pack current, and internal thermistor temperatures.
  • • State Estimation (SOC, SOH, SOP): Executes Kalman filter and Coulomb-counting algorithms to determine usable stored energy, battery degradation, and peak instantaneous discharge power.
  • • Cell Balancing: Equalizes charge states across series-connected cells via passive resistor shunt dissipation or active energy-redistributing circuits.
  • • Comprehensive Protection: Commands contactors to isolate the battery pack within milliseconds of detecting overvoltage, undervoltage, short circuits, or thermal anomalies.
  • • Industrial Communications: Broadcasts telemetry and commands to inverters and SCADA via CAN bus, Modbus RS485, and Ethernet protocols.

Core BMS Protection Thresholds

• Overvoltage Cutoff: 3.65 V / Cell (LFP)
• Undervoltage Cutoff: 2.50 V / Cell (LFP)
• Max Charge Temp: +45°C
• Min Charge Temp: 0°C (Prevents Lithium Plating)
• Max Discharge Temp: +55°C
• Short-Circuit Response: < 100 Microseconds
* Theoretical sizing calculations and hardware protection thresholds covered in Module 04 and Module 08.

Energy Storage Power & Control Architecture

🔋
Battery Cells
3.2V LFP / 3.7V NMC Chemistry Units
→
📦
Battery Modules
Series-Parallel Stringing with Voltage Taps
→
🗄️
Battery Pack / Rack
HV DC Bus with Disconnect & Fusing
→
🖥️
BMS Protection
Slave/Master Control, Contactor Relays
→
⚡
PCS Inverter
Bidirectional Inverter (AC ↔ DC)
→
🏭
Electrical Load / Grid
3-Phase 415V AC Facility or Grid
Applications

Where Are Battery Energy Storage Systems Used?

From distributed residential setups to multi-megawatt utility grids, explore key commercial deployment sectors.

🏡

1. Residential Battery Storage

Homeowners integrate 5 kWh to 15 kWh lithium battery packs with rooftop solar PV. This maximizes self-consumption of clean solar power, provides seamless blackout protection during outages, and optimizes energy costs under dynamic time-of-day tariffs.

🏭

2. Commercial & Industrial Storage

Factories, hospitals, data centers, and corporate parks install behind-the-meter BESS (100 kWh to 2 MWh) to perform peak shaving, reduce heavy contract maximum demand penalties, and replace polluting, costly diesel generators.

🗼

3. Utility-Scale BESS

Front-of-the-meter containerized systems (10 MWh to 500+ MWh) connected directly to transmission substations. These provide millisecond frequency regulation, ramp-rate control, transmission congestion relief, and renewable energy time-shifting.

🔄

4. Solar + Battery Hybrid Systems

Co-located solar-plus-storage projects combine photovoltaic farms with centralized DC-coupled or AC-coupled battery arrays to deliver firm, dispatchable, round-the-clock clean electricity to distribution utilities and agricultural feeders.

🔌

5. EV Charging Infrastructure

High-power DC fast charging hubs integrate on-site stationary battery storage to buffer grid connections. This enables 150 kW+ fast vehicle charging without demanding expensive, long-lead utility transmission upgrades.

🏝️

6. Microgrids & Remote Projects

Islanded and remote microgrids for mining sites, military bases, border posts, and rural electrification utilize battery storage as the primary voltage and frequency reference, displacing up to 90% of local diesel fuel consumption.

Methodology

Learn Battery Storage Technology at Your Own Pace

A 100% online self-paced structure built specifically for working professionals, technicians, and college students.

🕒

Self-Paced Flexibility

Study according to your schedule. Access all 10 modules whenever convenient without fixed login timings, allowing you to balance learning with job or university commitments.

💻

Web-Based Portal Access

Seamless learning access across modern desktop, laptop, tablet, and mobile browsers without requiring complex specialized software installations or high-end workstations.

📐

Engineering-Based Curricula

Learn through structured instructional modules designed by practicing renewable energy engineers, focusing on real-world calculations, sizing methods, and technical standards.

📊

Practical Sizing Exercises

Master practical sizing formulas: calculating kWh backup capacities, Depth of Discharge deratings, C-rate thermal considerations, and solar-plus-storage inverter matches.

📍

Nationwide Accessibility

Join from any city or state across India. Our self-paced online model delivers high-quality renewable technology education directly to your screen with zero travel overhead.

📜

Direct Certification Pathway

Complete the modular learning materials and clear the online technical assessment to earn your official IISE + CERT Certificate of Completion.

Target Audience

Who Should Join This Battery Storage Course?

Designed for individuals seeking clear foundational competency in energy storage technology.

Minimum Eligibility
10th Pass and Above (Any Stream)
🎓

Class 10 & Class 12 Pass Students

Build an early foundational understanding of clean technology, electrical parameters, and battery systems before choosing higher vocational or engineering paths.

🔧

ITI Students & Electrical Apprentices

Electricians, Wiremen, and Electronic Mechanics seeking to expand their trade knowledge into modern lithium-ion packs and BMS wiring conventions.

📜

Polytechnic Diploma Holders

Diploma engineers (Electrical, Electronics, Mechanical) looking to acquire domain-specific energy storage literacy for green power projects.

⚙️

B.Tech / B.E. Engineering Students

Electrical, Electronics, and Energy engineering undergraduates needing practical, application-oriented battery knowledge beyond textbook theory.

☀️

Solar PV Industry Professionals

Solar EPC contractors, designers, and site supervisors looking to expand their portfolio from standard on-grid solar into hybrid solar-plus-storage solutions.

💼

Electrical Technicians & Panel Builders

Maintenance electricians and control panel technicians needing to understand DC switchgear, fusing, thermal management, and BMS communications.

🚀

Renewable Energy Entrepreneurs

Business owners and startup founders planning to enter battery module distribution, solar-plus-storage integration, or EV charging infrastructure.

🔄

Industry Upskillers & Career Switchers

Professionals in conventional power, automotive, or industrial sectors who want to transition their careers toward the clean energy economy.

Career Pathways

Career Opportunities in Battery Storage and Energy Storage

Explore technical roles and operational pathways across India's booming energy storage industry.

Battery Technology Assistant

Assists in cell sorting, module string assembly, baseline voltage verification, and battery test bench monitoring.

Service & Maintenance Technician

Conducts periodic routine inspections, terminal torque checks, thermal filter replacements, and fault diagnostics on battery banks.

BMS Support Technician

Assists in sensor harness wiring, CAN bus cabling, BMS parameter configuration, and diagnostic error code interpretation.

Storage System Support Specialist

Provides technical customer support, battery sizing verification, and preliminary quotation support for energy storage vendors.

Solar + Battery Technician

Installs and troubleshoots hybrid solar inverters, battery rack interconnections, and backup load distribution sub-panels.

Storage Operations Assistant

Monitors telemetry dashboards, logs daily charge/discharge cycles, and tracks SOC and SOH metrics at commercial BESS installations.

BESS Project Support Specialist

Coordinates site logistics, container equipment staging, foundation compliance, and commissioning checklists for storage projects.

Renewable Energy Entrepreneur

Establishes a localized energy storage venture providing residential battery backup, C&I peak shaving, and hybrid solar installations.

Important Professional Disclaimer: The roles listed above represent potential career pathways and industry opportunities based on current renewable energy market expansion. Enrolling in or completing this introductory self-paced online course does not guarantee employment, job placement, or automated qualification for licensed engineering posts. Actual employment eligibility depends on individual educational background, previous field experience, practical hands-on skills, and hiring employer criteria.
Institutional Credibility

Why Learn Renewable Energy Technology with IISE?

A specialized clean-energy education pioneer committed to practical skill development across India.

🏛️

Established in 2018

Founded with a focused mission to deliver accessible, industry-aligned training across solar energy, electric mobility, and emerging renewable power technologies in India.

🤝

Technical Partnership with CERT

Operated as a Unit of CERMS India Foundation, with technical curriculum collaboration from the Centre for Energy Research and Training (CERT) ensuring technical rigour.

🎯

Industry-Oriented Curricula

Courses designed around real-world industry requirements, emphasizing calculation formulas, system sizing, safety standards, and practical system architectures.

🌐

Diverse Educational Tracks

IISE offers diverse educational programs across solar PV design, solar engineering, EV technology, and battery storage through online, distance, and hybrid learning tracks.

👥

Proven Training Track Record

Over 5,000 students, technicians, and industry professionals across India have enhanced their technical capabilities through IISE's specialized training initiatives.

🛡️

Transparent & Ethical Standards

No exaggerated claims, artificial timers, or unverified accreditation promises. We deliver authentic technical knowledge built on engineering fundamentals.

Instructional Excellence

Learn from Industry Experts

Our instructional framework combines academic fundamentals with seasoned engineering field insight.

👥

Multidisciplinary Energy Storage Faculty Team

The Fundamentals of Battery Storage curriculum has been developed and curated by a collective team of solar PV engineers, battery storage consultants, power electronics designers, and renewable energy educators. With collective industry experience spanning solar EPC execution, battery pack assembly, BMS troubleshooting, and containerized BESS installations across India, the instructional team ensures every module addresses real-world industrial challenges.

Solar EPC Specialists
BMS & Power Electronics Engineers
CERT Technical Researchers
Transparent Tuition

Enrol in the Fundamentals of Battery Storage Programme

Direct, transparent pricing with immediate online access upon enrolment confirmation.

Fundamentals of Battery Storage

1-Month Comprehensive Online Programme

₹9,999
All-Inclusive One-Time Programme Fee
  • ✓ 1 Month Structured Access
  • ✓ 100% Online – Self-Paced
  • ✓ 10 Detailed Modules
  • ✓ Eligibility: 10th Pass & Above
  • ✓ IISE + CERT Joint Certificate
  • ✓ Calculation Cheatsheets
  • ✓ Online Technical Evaluation
  • ✓ Immediate Enrolment
Admissions currently open. Transparent institutional tuition without hidden fees or forced loans.
Enrolment Steps

How to Enrol in 4 Simple Steps

A fast, transparent, and completely digital admission pathway.

01

Click Enrol Now

Fill out the simple admission enquiry form below or click Enrol Now to submit your applicant details.

02

Admission Verification

Our admissions desk verifies your details and provides official course access guidelines and fee payment links.

03

Complete Fee Payment

Follow the official instructions to securely remit the confirmed programme fee of ₹9,999.

04

Access Programme

Receive your individual course access instructions and start studying your 10 self-paced modules immediately.

Credential

IISE + CERT Certificate of Completion

Institutional recognition of technical competence in battery storage fundamentals.

📜

Certificate of Completion

Upon successfully completing all 10 modules and the required end-of-course online technical assessment, you will be awarded the official IISE + CERT Certificate in Fundamentals of Battery Storage.

ISSUED BY
IISE + CERT
VERIFICATION
Unique Certificate ID
CREDENTIAL FORMAT
Digital Verifiable PDF

* Note: This certificate is an institutional certificate of completion issued jointly by the Indian Institute of Solar Energy and the Centre for Energy Research and Training validating mastery of course concepts. It is not a university degree or AICTE-accredited diploma.

FAQ

Frequently Asked Questions – Fundamentals of Battery Storage

Find answers to common questions regarding eligibility, curriculum, schedule, and certification.

The Fundamentals of Battery Storage course is a comprehensive one-month, 100% online self-paced educational programme offered by the Indian Institute of Solar Energy (IISE) in technical collaboration with CERT. It covers electrical energy storage principles, battery chemistries (LFP, NMC, Lead-Acid, Sodium-Ion), Battery Management Systems (BMS), battery sizing calculations, and stationary BESS applications.

The total programme fee is ₹9,999. This is an all-inclusive one-time tuition covering online access to all 10 modules, learning materials, sizing templates, evaluation, and the final joint IISE + CERT Certificate.

The course duration is 1 Month. Because it is delivered in a self-paced format, you have the flexibility to study and progress through the modules according to your weekly schedule.

The minimum eligibility is 10th Pass and Above. The programme starts with fundamental concepts, making it accessible for Class 10/12 students, ITI certificate holders, polytechnic diploma students, engineering graduates, electrical technicians, and solar industry professionals.

Yes. The programme is delivered 100% online, allowing learners across India to access course materials without needing to travel or attend in-person classes.

Yes, the course is completely self-paced. There are no mandatory live attendance sessions at fixed hours, making it ideal for working professionals and regular college students.

No, an engineering degree is not required. Anyone who has completed Class 10 with basic numeracy and a keen interest in electrical or renewable energy technology can successfully enrol and understand the curriculum.

You will explore a wide range of battery technologies: Lithium-ion variants (LFP, NMC, NCA), Lead-Acid (Flooded and VRLA), Nickel-based batteries (NiCd, NiMH), Sodium-Ion batteries (SIB), and emerging architectures like solid-state and flow batteries.

Yes. Module 03 is dedicated entirely to Lithium-Ion Battery Technology and Architecture, covering LFP and NMC chemistries, cell form factors (cylindrical, prismatic, pouch), module stringing, energy density, and degradation dynamics.

Yes. Module 04 comprehensively covers BMS architecture, voltage, current, and temperature telemetry, SOC and SOH estimation, active and passive cell balancing, protection cutoffs, and CAN/RS485 communication protocols.

Yes. Module 06 covers Battery Energy Storage System (BESS) Design and Architecture, detailing battery racks, container enclosures, bidirectional inverters (PCS), Energy Management Systems (EMS), and thermal HVAC management.

Yes. Module 07 focuses specifically on Solar PV and Battery Storage Integration, comparing AC-coupled and DC-coupled systems, hybrid solar inverters, load prioritization, and solar-plus-storage sizing principles.

Yes. The curriculum begins with fundamental energy concepts, units of measure (Wh, kWh, W, kW), and basic electrochemistry before advancing into sizing and system engineering, making it very suitable for beginners.

Upon satisfactory completion of the 10 modules and the online technical evaluation, you will receive an official joint IISE + CERT Certificate of Completion issued by the Indian Institute of Solar Energy and CERT.

Yes, admissions are currently open with immediate online enrolment. Because this is a self-paced online course, you do not have to wait for an upcoming physical batch date.

Absolutely. The 100% online self-paced format is engineered specifically so working technicians, engineers, and professionals can study at their own pace in the evenings or over weekends.

No. IISE does not guarantee job placement or employment. This course provides specialized technical training and knowledge that enhances your technical competence and career prospects in energy storage, but final hiring depends entirely on individual background and employer criteria.

No. The Fundamentals of Battery Storage programme is delivered 100% online and self-paced. It focuses on conceptual foundations, sizing calculations, safety standards, and system architectures. It does not include physical laboratory training or industrial site visits.

You can enrol by clicking any ‘Enrol Now’ button on this page and submitting the simple admission form. Our admissions team will review your enquiry and provide the official registration and fee payment link.

You can reach IISE Admissions via email at info@iise.ac, by phone or WhatsApp at +91 9819225503, or by submitting an enquiry on our official website.

Related Courses

Explore More Renewable Energy Courses

Discover other specialized training programs offered by the Indian Institute of Solar Energy.

Energy Storage

Battery Energy Storage and Micro Grids in India

Advanced study of microgrid design, decentralized storage dispatch, and Indian regulatory frameworks for commercial BESS.

View Course Details
Solar Energy

Fundamentals in Solar PV Systems

Master solar radiation fundamentals, PV cell mechanics, string inverter sizing, and basic rooftop plant electrical design.

View Course Details
Electric Vehicles

PG Diploma in Electric Vehicle Technology

Comprehensive postgraduate program covering EV powertrain design, motor controllers, battery pack engineering, and vehicle dynamics.

View Course Details
Electric Vehicles

Advance Electric Vehicle Design Engineering

Specialized design course focusing on battery thermal management, high-voltage vehicle electrical architecture, and CAD design.

View Course Details
Solar Engineering

Solar Engineer Certificate Course

End-to-end engineering training covering solar system design, PVsyst simulation, single-line diagrams, and EPC commissioning.

View Course Details
Solar Practical

Solar Practical Workshop

Supervised hands-on training for installation techniques, tool handling, DC wiring, inverter connections, and testing protocols.

View Course Details

Start Your Journey into Battery Storage Technology Today

Build your understanding of battery technologies, Battery Management Systems and modern energy storage applications through IISE's one-month online programme.

Fee ₹9,999
Duration 1 Month
Mode 100% Online
Eligibility 10th Pass & Above
Admissions & Contact

Apply for Admission / Request Course Details

Submit your application below to receive official enrolment guidance and syllabus materials.

Admission Enquiry Form

Submit your applicant details to connect directly with the IISE Admissions Desk.

🔒 Your details are handled confidentially by IISE admissions and are never shared.

Institutional Profile

Indian Institute of Solar Energy

A Unit of CERMS India Foundation.

Technical Partner: Centre for Energy Research and Training (CERT).

Verified Admissions Contact

📧 Email: info@iise.ac
📞 Phone / Mobile: +91 9819225503