★ 6 Months Hybrid Programme Save ₹5,000 (16.67% OFF)

Solar Off-Grid Design & Installation

Master the complete engineering lifecycle of standalone solar photovoltaic systems — from load estimation and battery bank sizing to inverter selection, electrical protection switchgear, and live field commissioning.

📅
Duration
6 Months
💻
Learning Delivery
Hybrid Mode
📜
Certification
Joint IISE + CERT
🎓
Eligibility
10th Pass to Graduates
Approved Fee Structure Save ₹5,000
Course Fee:
₹24,999 ₹29,999 (16.67% OFF)
Special Offer Fee (Limited-Time Admission Window)

Application Fee: ₹999
* Note: ₹999 is the application fee to register and secure your seat. It is not the full course fee.
Remaining Balance: ₹24,000
* Balance payable according to the approved admission payment schedule.
EMI Facility: Available
Payment Facility: Online Admission Enabled
Apply Now & Pay Application Fee (₹999) →
🔒 Secure Official Payment Gateway
Course Overview Comprehensive 6-Month Hybrid Specialisation

What Is the Solar Off-Grid Design & Installation Course?

An off-grid solar system operates completely independently of the utility electricity grid — capturing solar irradiance through photovoltaic panels, regulating energy flow via maximum power point tracking (MPPT) charge controllers, storing power in specialized battery banks, and delivering stable alternating current (AC) power via pure sine wave inverters. Across India, decentralized off-grid solar infrastructure powers remote agricultural water pumps, telecommunication base stations, commercial healthcare clinics, educational institutions, eco-resorts, and off-grid residential homes where grid availability is either absent, intermittent, or expensive.

The Solar Off-Grid Design & Installation course by the Indian Institute of Solar Energy (IISE) in collaboration with the Centre for Energy Research and Training (CERT) is a structured six-month hybrid learning programme. It is engineered specifically to produce competent, job-ready solar designers, project engineers, and clean energy entrepreneurs who can calculate loads accurately, design robust battery energy storage systems, specify compliant electrical switchgear, and safely commission real-world installations.

🌐 Live Online Theory Classes

Interactive online classes led by senior solar engineering faculty covering system physics, sizing formulas, mathematical worksheets, equipment standards, single-line diagrams, and simulation models.

⚡ Practical Training Sessions

Hands-on practical training sessions conducted at IISE's physical training facility according to the practical session schedule, allowing students to work directly with live solar arrays, battery banks, inverters, and testing instruments.

💡 Industry Insight: While grid-tied solar systems shut down during utility blackouts for anti-islanding safety, off-grid systems with dedicated battery storage guarantee uninterrupted power continuity. As commercial facilities, telecom installations, and microgrids seek true energy independence, qualified off-grid solar engineers command high demand across India and international markets.
Admission & Prerequisites Broad Academic & Professional Access

Who Should Enroll in This Course? (Eligibility)

The Solar Off-Grid Design & Installation course retains a broad eligibility framework, welcoming candidates from diverse educational and technical backgrounds — subject to the institution's admission requirements. Whether you are stepping into technical education for the first time or pivoting from traditional power engineering into clean technology, the curriculum provides progressive learning pathways:

🎯

10th-Pass Candidates

Build foundational technical skills in clean energy installation, wiring standards, tool handling, and maintenance to launch a stable, skilled career in the expanding solar sector.

✔ Practical Vocational Entry
🔧

ITI Holders

Electrician, Wireman, Fitter, and Electronics tradesmen can translate their electrical trade certification into specialized off-grid solar commissioning and supervisory roles.

✔ Trade to Specialist Progression
📐

Diploma Holders

Diploma holders in Electrical, Mechanical, Civil, and Electronics engineering upgrade their technical knowledge to lead field execution, system sizing, and team supervision.

✔ Field Leadership Competency
🎓

Graduates

Science, Commerce, Arts, or Computer graduates looking to transition into the fast-paced green economy through practical project design, technical sales, and project coordination.

✔ Clean-Tech Sector Pivot
⚙️

Engineering Graduates

B.E. / B.Tech in Electrical, Mechanical, Civil, or Energy Engineering bridge the gap between academic theory and real-world EPC sizing, battery storage calculations, and site safety.

✔ Industry-Ready Design Skills
💼

Working Professionals

Power utility, electrical contracting, MEP, HVAC, and facilities professionals who want to upskill into standalone solar systems via flexible weekend and hybrid schedules.

✔ Flexible Hybrid Upskilling
🚀

Solar Technicians & Aspiring Solar Entrepreneurs

Contractors, dealers, and aspiring business owners looking to launch or scale their own solar EPC, sales, or installation venture. Gain the technical mastery to quote accurately, design reliable off-grid systems, and win customer trust with verified certification credentials.

✔ End-to-End Entrepreneurial Empowerment

* Admission is accessible to eligible candidates subject to verification of prerequisites and the institution's admission requirements.

Six-Month Structured Programme Theory Mastery + Practical Application

Complete Six-Module Curriculum

The Solar Off-Grid Design & Installation curriculum is systematically structured into 6 comprehensive technical modules. Spanning 6 months of hybrid delivery, each module unites live online theory with practical training sessions at IISE's training facility:

01
Module 1

Fundamentals of Off-Grid Solar Systems

Explore the physical principles of solar photovoltaics and the vital distinctions between on-grid, off-grid, and hybrid energy architectures. Understand solar radiation fundamentals, Peak Sun Hours (PSH), air mass, angle of incidence, and photovoltaic cell physics. Analyze current-voltage (I-V) and power-voltage (P-V) characteristics, standard test conditions (STC), and normal operating cell temperature (NOCT).

Solar Panel Daily Energy Yield (Wh) = Panel Wattage (Wp) × Peak Sun Hours (hrs) × System Derating Factor
💡 Engineering Pro-Tip: India's regional solar insolation varies significantly — from 4.0 PSH in northeastern hilly regions to over 6.0 PSH in Rajasthan and Gujarat. Always design off-grid arrays using the worst-case month (lowest PSH) to prevent seasonal battery starvation.
02
Module 2

Load Estimation & System Sizing

Master the engineering discipline of site surveys and rigorous load auditing across residential, agricultural, and commercial premises. Differentiate between resistive, inductive, and electronic loads. Calculate continuous running wattages versus motor starting surge currents (inrush). Build professional load profile worksheets calculating total daily energy consumption in watt-hours (Wh/day).

Solar Array Capacity (Wp) = Total Daily Load (Wh) ÷ [ Peak Sun Hours (hrs) × System Balance Efficiency (η) ]
💡 Engineering Pro-Tip: Inductive loads like water pumps, refrigerators, and air conditioner compressors draw 3× to 7× their rated running wattage during startup. Inverter sizing must comfortably match this peak surge capacity, or the system will trip continuously.
03
Module 3

Solar Panel Selection & Mounting Design

Evaluate photovoltaic module technologies including Polycrystalline, Monocrystalline PERC, TOPCon, and Bifacial panels. Compare temperature coefficients of power, degradation rates, and low-light performance. Determine optimal fixed tilt angles and true south azimuth alignment for Indian latitudes. Design rooftop and ground-mounted racking structures adhering to IS 875 Part 3 wind loading standards.

Optimal Fixed Tilt Angle (°) ≈ Site Latitude (adjusted ± 10° to optimize winter vs summer energy yield)
💡 Engineering Pro-Tip: Even partial shading across a single cell in a series string can reduce string output by over 50% and trigger destructive thermal hotspots. Always perform a winter-solstice sun-path analysis before finalizing panel mounting layouts.
04
Module 4

Battery Bank Design & Charge Controllers

Deep dive into energy storage chemistry: Flooded Lead-Acid, Tubular, VRLA/AGM, Gel, and Lithium Iron Phosphate (LiFePO4). Calculate required battery storage capacity based on system voltage (12V, 24V, 48V) and autonomy requirements. Evaluate Depth of Discharge (DoD), C-ratings, cycle life economics, and temperature derating. Compare Pulse Width Modulation (PWM) versus Maximum Power Point Tracking (MPPT) charge controllers and configure charging setpoints.

Battery Bank Capacity (Ah) = [ Total Daily Load (Wh) × Autonomy Days ] ÷ [ System Voltage (V) × Depth of Discharge (DoD) ]
💡 Engineering Pro-Tip: While Lead-Acid batteries are restricted to 50% Depth of Discharge to preserve cycle life, LiFePO4 lithium batteries comfortably operate up to 80–90% DoD and provide 3,000–6,000 cycles, significantly lowering 10-year levelized cost of storage.
05
Module 5

Inverter Selection, Wiring & Electrical Protection

Select off-grid inverters based on waveform quality (Pure Sine Wave vs Modified Sine Wave), efficiency curves, surge multiplier, and standby power draw. Size DC cables and AC distribution wiring to limit voltage drop below 2–3%. Integrate critical protection hardware: DC circuit breakers (MCBs), high-voltage DC fuses, Type-2 surge protection devices (SPDs), DC disconnect isolators, and chemical earthing pits compliant with IS 3043 and Central Electricity Authority (CEA) guidelines.

DC Cable Cross-Section (mm²) = [ 2 × Cable Length (m) × Current (A) ] ÷ [ Conductivity (56 m/Ω·mm²) × Allowable Voltage Drop (V) ]
💡 Engineering Pro-Tip: DC arcing does not cross a natural zero-voltage point like AC does. Never substitute AC circuit breakers in DC circuits — always use rated DC MCBs and DC disconnect switches to eliminate fire risk.
06
Module 6

Commissioning, Troubleshooting & O&M

Execute standard pre-energisation inspection checklists: open-circuit voltage (Voc) verification, short-circuit current (Isc) testing, insulation resistance (megger) checks, and battery bank polarity confirmation. Configure inverter charging profiles and low-voltage disconnects (LVD). Learn systematic diagnostic trees for 20+ common field faults (ground faults, inverter error codes, battery sulfation, reverse polarity). Establish preventive Operations & Maintenance (O&M) schedules for long-term reliability.

System Performance Ratio (PR) = Actual Energy Delivered (kWh) ÷ [ Installed Capacity (kWp) × Peak Sun Hours (hrs) ]
💡 Engineering Pro-Tip: Before closing the DC battery disconnect switch, always verify battery polarity with a digital multimeter. Even a momentary reverse polarity connection will instantly destroy inverter power stage MOSFETs.
Practical Training Sessions Physical Sessions at IISE Training Facility

Practical Training Sessions & Lab Hardware

Theory becomes engineering competence through physical, hands-on application. As an integral component of the hybrid learning structure, students attend supervised practical training sessions conducted at IISE's physical training facility according to the scheduled training timetable. Students operate directly on live hardware test benches, measuring instruments, and industrial switchgear:

☀️

Live Photovoltaic Arrays

Monocrystalline PERC, TOPCon, and Polycrystalline panels for series/parallel stringing, tilt optimization, and I-V curve testing.

🔋

Dual Battery Test Benches

Tubular lead-acid, Gel, and Lithium (LiFePO4) battery banks at 12V, 24V, and 48V for DoD testing, internal resistance, and wiring.

🎛️

MPPT & PWM Controllers

Victron Energy, Luminous, and industry charge controllers for parameter programming, bulk/absorb/float voltage tuning.

🔄

Pure Sine Wave Inverters

1 kVA to 10 kVA standalone and hybrid off-grid inverters for AC output harmonic testing, motor inrush testing, and transfer switching.

📐

Precision Test Instrumentation

Digital clamp meters, True-RMS DC/AC multimeters, insulation resistance megohmmeters, and solar pyranometers.

📊

Data Loggers & Telemetry

Real-time IoT data loggers and energy dashboards tracking solar generation, battery state of charge (SoC), and load consumption.

💻

Simulation & CAD Workstations

PVSyst, HOMER Pro, and solar CAD software tools for off-grid modeling, shading analysis, and system single-line diagram (SLD) creation.

🛡️

DC Switchgear & Earthing Rigs

Dedicated DC disconnect isolators, gPV DC fuses, Type-2 SPDs, copper-bonded chemical earthing electrodes, and lightning arrestors.

📌 Practical Training Confirmation: The practical training sessions are conducted physically at IISE's training facility as part of the six-month hybrid learning structure. The exact timetable of in-person practical sessions is coordinated through the institutional schedule upon admission.
Interactive Technical Tool Standard Engineering Sizing Engine

Off-Grid Solar System Size Estimator

Estimate your standalone solar array capacity, required module count, battery bank storage capacity, and approximate project investment in real time:

e.g. 3 kWh = 3000 Wh/day
Worst-case or average solar irradiance
Accounts for inverter & wiring losses (Typ: 80%)
Days to run without sun (Typically 1–2 days)
Battery bank DC bus voltage
Safe discharge limit per chemistry
📊 Calculated System Engineering Results:
Recommended Array Size 750 Wp
400W Solar Panels 2 Panels
Battery Storage Capacity 295 Ah
Estimated System Cost ₹45,000 – ₹55,000
* Sizing estimates utilize standard electrical engineering balance-of-system assumptions. Actual project sizing, string voltages, and single-line diagrams must be engineered according to site-specific conditions by a trained solar professional.
Enroll & Master Off-Grid Design — ₹999 Application Fee →
Pay ₹999 application fee online to secure your seat. Remaining balance of ₹24,000 payable as per schedule.
Employment & Business Pathways High-Growth Renewable Energy Sector

Career Outcomes After This Course

Graduates of the Solar Off-Grid Design & Installation course enter a dynamic renewable energy job market. With decentralised solar power generation, battery energy storage systems (BESS), and standalone microgrids expanding rapidly across India, trained professionals possessing practical sizing, wiring, and commissioning skills command immediate value across multiple industry verticals:

Solar EPC Project Engineer

₹4.0 – 9.0 LPA

Lead end-to-end site installation, technical procurement, switchgear integration, and on-site testing for engineering, procurement, and construction (EPC) companies.

Off-Grid System Designer

₹4.5 – 10.0 LPA

Develop comprehensive load analysis worksheets, battery bank configurations, PVSyst simulation reports, and single-line diagrams for bespoke standalone systems.

Renewable Energy Consultant

₹5.0 – 12.0 LPA

Advise commercial agricultural estates, healthcare facilities, and resorts on energy audits, diesel generator displacement, and off-grid solar financial feasibility.

Solar Installation Entrepreneur

High ROI Potential

Launch your own solar sales, dealership, or installation contracting enterprise. Master the technical depth required to win customer trust and deliver profitable turnkey projects.

Solar O&M Specialist

₹3.5 – 7.5 LPA

Manage ongoing operational maintenance, battery bank health audits, inverter error diagnostics, and performance optimization for solar asset portfolios.

Technical Sales Specialist

₹4.0 – 8.5 LPA + Inc.

Bridge client requirements and technical proposals for solar distributors and manufacturers, sizing custom off-grid solutions that win competitive commercial bids.

Official Joint Credential Verified Professional Certification

Joint Certification by the Indian Institute of Solar Energy (IISE) and Centre for Energy Research and Training (CERT)

Upon successful completion of the six-month hybrid curriculum — including theoretical assessments and practical training sessions at IISE's training facility — candidates are awarded the prestigious Joint Certification by the Indian Institute of Solar Energy (IISE) and Centre for Energy Research and Training (CERT).

Credential Features & Professional Value:

  • Joint Institutional Issuance: Co-certified by IISE (India's premier solar education body) and CERT (Centre for Energy Research and Training).
  • Comprehensive Scope: Formally validates technical competencies across standalone photovoltaic load estimation, battery bank sizing, inverter selection, wiring protection, and field commissioning.
  • Unique Verification Identifier: Includes a registered certification number allowing prospective employers, EPC clients, and partners to verify authenticity online.
  • Career Advancement: Widely recognized across the clean energy ecosystem for solar engineering, technical sales, supervisory, and contracting roles.
📜
Joint Certification by IISE & CERT
Solar Off-Grid Design & Installation
Awarded for successful mastery of 6-Month Hybrid Theory and Practical Training Curriculum.
Jointly issued by Indian Institute of Solar Energy & Centre for Energy Research and Training.
Institutional Notice: The awarded credential represents a professional joint certification issued by IISE and CERT. It is structured to provide rigorous industry-oriented practical competence for engineering careers and solar entrepreneurship.
Transparent Commercials Approved Admission Schedule

Programme Fee, Payment Schedule & EMI Facility

The approved fee structure for the 6-Month Hybrid Solar Off-Grid Design & Installation programme is transparent and structured to support accessible online enrollment:

Regular Course Fee ₹29,999 Standard institutional tuition
Special Offer Fee ₹24,999 Save ₹5,000 (16.67% OFF)
Application Fee ₹999 To apply & reserve your seat
Remaining Balance ₹24,000 Payable as per approved schedule

Key Payment & Admission Terms:

  • Application Fee Clarification: The ₹999 payment is strictly the application fee required to register and secure your seat. It is not the full course fee.
  • Balance Payment: The remaining balance of ₹24,000 is payable according to the approved admission payment schedule communicated by IISE admissions.
  • EMI Facility: An EMI facility is available for candidates seeking flexible installment payment options.
  • Online Admission & Payment Facility: Seamless online admission is active, allowing instant application fee payment via credit card, debit card, UPI, net banking, and wallets.
Batch OptionDurationDelivery FormatSpecial Offer FeeApplication FeeAction
Weekend Batch
Live Online Theory + Scheduled Practical Sessions
6 MonthsHybrid ₹24,999
₹29,999
₹999 Apply Now →
Weekday Evening Batch
Live Online Theory + Scheduled Practical Sessions
6 MonthsHybrid ₹24,999
₹29,999
₹999 Apply Now →
Working Professional Batch
Structured Hybrid Track with Dedicated Practical Schedule
6 MonthsHybrid ₹24,999
₹29,999
₹999 Apply Now →
Balance of ₹24,000 payable according to the approved admission payment schedule.
Alumni Perspectives Verified Student Reviews

What Our Students Say

Hear from engineers, entrepreneurs, and technicians who built their careers through IISE's structured clean energy training:

★★★★★

"Coming from an electrical engineering background, college taught me equations but never how to size real off-grid battery banks or select MPPT controllers. The 6-month hybrid structure allowed me to attend live online theory in the evenings and practical training sessions at the IISE facility. Today I manage standalone solar EPC projects across rural Maharashtra with complete confidence."

Arjun Mehta
Solar EPC Engineer, Pune
★★★★★

"I wanted to launch an independent solar installation business catering to agricultural solar pumps and farmhouses. Learning how to properly size LiFePO4 batteries, calculate inverter surges, and conduct pre-commissioning checks gave me an immense competitive edge. The Joint Certification by IISE and CERT provided immediate credibility when presenting proposals to prospective clients."

Priya Subramaniam
Founder, GreenWatt Solar Solutions, Chennai
★★★★★

"As an ITI electrician, I had the wiring basics but lacked specialized solar design competence. The instructors at IISE break down complex calculations into clear, practical worksheets. The practical training sessions at the facility let me test live MPPT controllers and battery rigs directly. I've now progressed to a junior commissioning role with a 40% salary hike."

Rohan Pradhan
Junior Solar Engineer, Electrification Project
Questions & Answers Comprehensive Programme Clarifications

Frequently Asked Questions

Find clear answers to key queries regarding eligibility, duration, delivery structure, certification, fees, and admission:

The course maintains a broad eligibility framework covering 10th-pass candidates, ITI holders (Electrician, Wireman, Fitter), Diploma holders, Graduates (B.Sc, BCA, B.Com, B.A.), Engineering graduates (B.E. / B.Tech in Electrical, Civil, Mechanical, Renewable Energy), working professionals seeking a clean-tech pivot, as well as solar technicians and aspiring solar entrepreneurs. The course is accessible to candidates from different educational and professional backgrounds, subject to the institution's admission requirements.
The course has a confirmed duration of six months delivered through a hybrid model. This structure combines live online theory classes with physical practical training sessions conducted at IISE's training facility. Practical sessions are held according to the institution's scheduled practical timetable, ensuring students develop both theoretical mastery and hands-on operational confidence.
The regular course fee is ₹29,999 and the special offer fee is ₹24,999, providing a total savings of ₹5,000 (16.67%). Under the approved admission process, candidates pay an application fee of ₹999 online to secure their admission and reserve their seat. The remaining balance of ₹24,000 is payable according to the approved admission payment schedule. Please note that ₹999 is strictly the application fee, not the full course fee.
Yes, an EMI facility is available for enrolled candidates. Full information on balance payment options and the installment schedule is provided by the IISE admission office upon registration.
Graduates receive the "Joint Certification by the Indian Institute of Solar Energy (IISE) and Centre for Energy Research and Training (CERT)." This joint institutional credential validates successful completion of the six-month theory and practical training syllabus.
The practical training sessions are held in person at IISE's dedicated physical training facility. The practical session schedule is provided to enrolled students so they can plan their attendance and complete all mandatory hardware training modules.
Yes. The hybrid model is specifically designed for working professionals and current college students. Live online theory classes are scheduled conveniently, while practical training sessions are conducted according to structured batches, enabling participants to complete the programme without interrupting full-time employment.
You can complete your application immediately by clicking any "Apply Now" button on this page. This connects directly to the official IISE online admission and payment portal where you pay the ₹999 application fee. Upon receipt of payment, the IISE admission office confirms your registration and shares the batch calendar and balance payment schedule.